Manuscript Number : IJSRSET2310120

Design and Fabrication of Automated Board Cleaner

Authors(4) :-Dr. N. Gayathri, B. L. Abilash, K. Balamurugan, C. R. Abevartha

Automation plays a major role in contributing for the societal development and to deliver best engineering solutions. The present project aimed to develop automated board cleaner to reduce the time consumed for board cleaning during teaching process and to increase lecture deliver time. With this motivation, the construction and model of automated board cleaner is done through manual & Auto cad software and validated for the dimensional accuracies for each component. The fabrication process is initiated through the designed Auto cad model. Components such as White board, duster, frames, rods, lead screw, servo motor, bush, switch and copper wires were used for the fabrication process. The "Automated Board Cleaner" is a superb alternative to the "Manual Duster" and can be recommended for practical use to lessen the work required of users of the boards as well as to implement the same in the classroom with an automation system that further enhances the quality of smart classrooms.

Authors and Affiliations

Dr. N. Gayathri
Department of Mechanical Engineering, VelTech HighTech Dr.Rangarajan Dr.Sakunthala Engineering College, Chennai, Tamilnadu, India
B. L. Abilash
Department of Mechanical Engineering, VelTech HighTech Dr.Rangarajan Dr.Sakunthala Engineering College, Chennai, Tamilnadu, India
K. Balamurugan
Department of Mechanical Engineering, VelTech HighTech Dr.Rangarajan Dr.Sakunthala Engineering College, Chennai, Tamilnadu, India
C. R. Abevartha
Department of Mechanical Engineering, VelTech HighTech Dr.Rangarajan Dr.Sakunthala Engineering College, Chennai, Tamilnadu, India

Automated, Battery, Duster, Whiteboard, Wiper Motor

  1. Imam-Ul-Ferdous, A.H.M Fazle Elahi, “Development of an Automatic Board Cleaning system using Microcontroller”, International conference on Mechanical, Industrial and Energy Engineering, 2014.
  2. Simolowo, O. E., Ngana, O, “Preliminary Design of an Automated White Board Cleaner,” An International Multidisciplinary Journal, Ethiopia Vol.8 (2), Serial No. 33, pp.68-82, 2014.
  3. Joshibaamali, K. Geetha Priya, “Automatic duster machine,” International Journal of Emerging Technology in Computer Science & Electronics, 13(1), 2015.
  4. Sonia Akter, and AnindoSaha, “Automatic whiteboard cleaner using microcontroller based rack and pinion mechanism,” International conference on Mechanical, Industrial and Material Engineering 2015(ICMIME2015), pp.11-13, 2015.
  5. Deshant M. S, Faizen Jameel, Dipendra Sah, Dheeraj J Ferrao. “Blackboard Cleaning Aid”, International Digital Library of Technology and Research, Volume 1, Issue 3, 2017.
  6. N. P. Mungle, Siddhant Shambharkar, “Ecofriendly Duster Cleaning Machine,” International Research Journal of Engineering and Technology, Volume 4, Issue 3, 2017.
  7. Avan Prabhakar, H. N. Vignesh, “Design and Fabrication Vacuum Operated Chalk Dust Collector,” International Journal of Scientific & Engineering Research, Volume 9, Issue 5, 2018.
  8. M.Suresh, Dr. R.Meenakumari, Dr. P.S Raghavendran, V. Gowrishankar, P.Karthikeyan, V. Surendar, C. Jagan, N.Krishna Prashant, “Design and Development of Automatic Whiteboard Cleaner for Effective Cleaning Mechanism using Arduino” IJIREEICE, vol.6, Issue 9, 2018.
  9. Mohan Umbarkar, Shanti Kattitharayil, Flavian Rozario, “Design& Fabrication of Smart Board Cleaner” IRJET, Vol 06, Issue 04, 2019.
  10. Sumit Chavan, Vishal Shinde, Nikhil Murade, Anjali Jagtap, Varsha Degaonkar, “Automatic White Board Cleaner ” JCSE, vol.7, Issue 5, 2019.
  11. Venkatesh, S., Kumar, R.S., Sivapirakasam, S.P., Sakthivel, M., Venkatesh, D. and Arafath, S.Y., “Multi-objective optimization, experimental and CFD approach for performance analysis in square cyclone separator”, Powder Technology, 371, pp.115- 129, 2020.
  12. S.Vignesh, K.Vinith, K.Mouleswaran, H.M. Sanjay, and M. Logeshwaran, “A Review on Automatic Blackboard Cleaner ” IJRESM, vol.4, pp. 103 – 106, 2021.
  13. T. Ramakrishnan, M. Sathesh Babu, S. Balasubramani, K. Manickaraj, R.Jeyakumar., “Effect of Fiber Orientation and Mechanical Properties of Natural Fiber Reinforced Polymer Composites-A Review”, Paideuma journal, 14 (3), pp. 17-23, 2021.

Publication Details

Published in : Volume 10 | Issue 1 | January-February 2023
Date of Publication : 2023-02-28
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 128-131
Manuscript Number : IJSRSET2310120
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

Dr. N. Gayathri, B. L. Abilash, K. Balamurugan, C. R. Abevartha, " Design and Fabrication of Automated Board Cleaner, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 10, Issue 1, pp.128-131, January-February-2023. Available at doi : https://doi.org/10.32628/IJSRSET2310120      Journal URL : https://res.ijsrset.com/IJSRSET2310120

Article Preview