Manuscript Number : IJSRSET19647

Development and Study for the Conversion of Silo Ash into Aggregate of Different Fraction

Authors(3) :-Zohaib Uddin, Dr. Prabha Padmakaraan, Dr Ak Saxena

In This Study, The Strength and Productivity of Artificial Aggregate of Different Fraction Made Utilizing Fly Ash (Silo Ash), Silo Fly Ash Has Been Used and The Attempt Has Been Made to Cast the Finished Product in The Form of Aggregate of Different Fraction. The Measured Properties of Artificial Aggregate Were Crushing Strength, Fineness Modulus, Leach ability Test or pH, Fine Wastage, Specific Gravity, Density, Voids and Water absorption.

Authors and Affiliations

Zohaib Uddin
Civil Engineer, Samrat Ashok Technological Institute. Vidisha, Madhya Pradesh, India
Dr. Prabha Padmakaraan
Senior Technical Officer, CSIR-AMPRI, Bhopal, Madhya Pradesh, India
Dr Ak Saxena
Professor, Samrat Ashok Technological Institute. Vidisha, Madhya Pradesh, India

Artificial Aggregate, Waste To Wealth, Industrial Waste Utilization, Geo Polymeric Aggregate, Synthetic Aggregate

  1. K. L. Harikrishnan, Ramamurthy K., “Study of parameters influencing properties of sintered fly ash aggregates”, Journal of Solid Waste Technology and Management 30(3): 136-142, Aug 2004.
  2. U. S. Agrawal, S. P. Wamjari, D.N. Naresh, “Characteristic study of Geopolymer fly ash sand as a replacement to natural river sand”, Elsevier, Science Direct, Construction and Building Materials, 150 (2017) 681-688.
  3. Van Jaarsveld, J.G.S., Van Deventer, J.S.J., Lukey, G.C., “The effect of composition and temperature on the properties of fly ash and kaolinite based Geopolymer”, Chem. Eng. J. 2002, 89, 63-73.
  4. Daniel L. Y. Kong, Jay G. Sanjayan, “Effect of elevated temperature on Geopolymer paste, mortar and concrete”, Elsevier, Science Direct, Cement and Concrete Research 40 (2010) 334-339.
  5. Daniel L. K. Kong, Jay G. Sanjayan, Kwesi Sagoe-Crentsil, “Comparative Performance of Geopolymers made with metakaolin and fly ash after exposure to elevated temperatures”, Elsevier, Science Direct, Cement and Concrete Research 37 (2007) 1583-1589.
  6. K. Srinivasan and A. Sivakumar, “Geopolymer Binders: A Need for Future Concrete Construction”, Hindawi Publishing Corporation, ISRN Polymer Science, Volume 2013.
  7. Mohd Mustafa Al Bakri Abdullah, Liyana Jamaludin, Kamarudin Hussin, Mohamed Bnhussain, Che Mohd Ruzaidi Ghazali and Mohd Izzat Ahmad, “Fly Ash Porous Material using Geopolymerization Process for High Temperature Exposure”, Int. J. Mol. Sci. 2012, 13, 4388-4395.
  8. Sudhakar M. Rao and Indra Prasad Acharya, “Synthesis and Characterization of Fly Ash Geopolymer Sand” J. Mater. Civ. Eng.© ASCE/ May 2014.
  9. B. V. Venkatarama Reddy, “ Suitability of manufactured sand (M-Sand) as fine aggregate in mortars and concrete” Department of Civil Eng., Indian Institute of Science Bangalore, January 2012.
  10. Zhu Pan, Jay G. Sanjayan, B. V. Rangan, “An investigation of the mechanisms for strength gain or loss of Geopolymer mortar after exposure to elevated temperature”, J Mater Sci (2009) 44:1873-1880.
  11. Davidovits J., “Geopolymers: inorganic polymeric new materials”, Journal of Thermal Analysis, 37(8), 1991, pp. 1633-1656.
  12. Rangan B. V., “Studies on low-calcium fly ash based Geopolymer concrete”, Indian Concrete Institute, 2006, pp. 433-437.
  13. Davidovits J., “Geopolymer chemistry and application, Institute Geopolymer, France, 2008, pp. 585.
  14. In Reinforced Cement Concrete constructions”, Constr. Build. Mater. 125 (2016) 1152–1157.
  15. Kostas Komnistas, Dimitra Zaharaki, “Geopolymerisation: A review and prospects for the minerals industry”, Elsevier, Science Direct, Mineral Engineering 20 (2007) 1261-1277.
  16. Byung-wan Jo, Seung-kook Park, Jong-bin Park, “Properties of concrete made with alkali-activated fly ash lightweight aggregate (AFLA)”, Elsevier, Science Direct, Cement and Concrete, Volume 29, Issue 2, February 2007, Pages 128-135.
  17. C. K. Yip and J. S. J. Van Deventer, “Effect of Mineralogy of Calcium Sources on Geopolymerisation”, Cement and Concrete Research 38(4):554-564 · April 2008.
  18. K. Krausova, T. W. Cheng, L. Gautron, Y. S. Dai and S. Borenstajn, “Heat Treatment on Fly and Bottom Ash Based Geopolymers: Effect on the Immobilization of Lead and Cadmium” International Journal of Environment Science and Development, Vol. 3, No. 4, Aug 2012.
  19. Sameer Vyas, Neetu Singh, R. P. Pathak, Pankaj Sharma, N. V. Mahure, S. L. Gupta, “Behaviour of Alkali Activated Fly Ash-Based Geopolymer Concrete on Thermal Activation”, International Journal of Civil Engineering and Technology (IJCIET), Vol. 5, Issue 4, April (2014), pp. 28-36.
  20. P. Aggarwal Y. Aggarwal, S. M. Gupta, “Effect of Bottom Ash as Replacement of the Fine Aggregates in Concrete”, Asian Journal of Civil Engineering (Building and Housing) Vol. 8, No. 1 (2007), pp. 49-62.
  21. Rafiza Abdul Razak, Mohd Mustafa Al Bakri Abdullah, Djwantoro Hardjito, Zarina Yahya, “Review on the Properties of Aggregates Made with or without Geopolymerisation Method” Advanced Materials Research Vol. 626 (2013) pp 892-895.
  22. J. M. J. M. Bijen, “Manufacturing processes of artificial lightweight aggregates from Fly ash” International Journal of Cement Composites and Lightweight Concrete, Vol. 8, Issue 3, Aug 1986, pp. 191-199.
  23. P. Gomathi and A. Sivakumar, “Cold Bonded Fly Ash Lightweight Aggregates Containing Different Binders”, Research Journal of Applied Science, Engineering and Technology 7(6): 1101-1106, 2014.
  24. V. Kumar, M. Mathur, S.S. Sinha, “A case study: manifold increase in fly ash utilization in 244 India”, Proc. Int. Congress Fly Ash, Dept of Science and Technology, New Delhi, India, pp. 11.1–11.8, 2005.
  25. A.L.A. Fraay, J.M. Bijen, Y.M. de Haan, “The reaction of fly ash in concrete a critical examination”, Cem. Concr. Res. 19 (2) (1989) 235–246.
  26. R. Siddique, “Effect of fine aggregate replacement with Class F fly ash on the abrasion resistance of concrete”, Cem. Concr. Res. 33 (11) (2003) 1877–1881.
  27. S. Mortazavi, “Effect of bottom ash as a replacement of fine aggregates in concrete”, Asian J. Civ. Eng. 8 (1) (2007) 49–62.
  28. E.K. Aruna, M. Kavitha, “Studies on partial replacement of sand with flyash in concrete”, Eur. J. Adv. Eng. Technol. 1 (2) (2014) 89–92.
  29. E.J. Guades, “Effect of coarse aggregate size on the compressive behaviour of geopolymer concrete geopolymer concrete”, Eur. J. Environ. Civ. Eng. 8189 (March) (2017) 1–17
  30. T. Bilir, O. Gencel, I. Bekir, “Properties of mortars with fly ash as fine aggregate”, Constr. Build. Mater. 93 (2015) 782–789.
  31. B.V. Rangan, “Fly ash-based geopolymer concrete, in: Proc. Int. Work.v Geopolymer Cem. Concr”. December, vol. 2010, pp. 68–106, 2010.
  32. B. Singh, G. Ishwarya, M. Gupta, S.K. Bhattacharyya, “Geopolymer concrete: a review of some recent developments”, Constr. Build. Mater. 85 (2015) 78–90.
  33. A. Wongsa, Y. Zaetang, V. Sata, P. Chindaprasirt, “Properties of lightweight fly ash geopolymer concrete containing bottom ash as aggregates”, Constr. Build. Mater. 111 (2016) 637–643.
  34. F.U.A. Shaikh, “Mechanical and durability properties of fly ash Geopolymer concrete containing recycled coarse aggregates”, Int. J. Sustain. Built Environ. 5 (2) (2016) 277–287.
  35. N. Lloyd, B.V Rangan, “Geopolymer Concrete: A Review of Development and Opportunities”, Ci-premier Pte Ltd, Article No: 100035037, 2010.
  36. D. Joseph, “Geopolymer Chemistry and Applications”, 4th ed., Institut Géopolymère, vol. 4 pp. 1–620, 2015.
  37. E.I. Diaz, E.N. Allouche, S. Eklund, “Factors affecting the suitability of fly ash as source material for geopolymers”, Fuel 89 (5) (2010) 992–996.
  38. I. García-Lodeiro, A. Fernández-Jiménez, A. Palomo, D.E. MacPhee, “Effect of calcium additions on N-A-S-H cementitious gels”, J. Am. Ceram. Soc. 93 (7) (2010) 1934–1940.
  39. P. Nath, P.K. Sarker, “Flexural strength and elastic modulus of ambient-cured blended low-calcium fly ash geopolymer concrete”, Constr. Build. Mater. 130 (2017) 22–31.
  40. H.K. Shehab, A.S. Eisa, A.M. Wahba, “Mechanical properties of fly ash based geopolymer concrete with full and partial cement replacement”, Constr. Build. Mater. 126 (2016) 560–565.
  41. A.A. Aliabdo, A. Elmoaty, M.A. Elmoaty, H.A. Salem, “Effect of cement addition, solution resting time and curing characteristics on fly ash based Geopolymer concrete performance”, Constr. Build. Mater. 123 (2016) 581–593.
  42. A.A. Patil, H.S. Chore, P.A. Dode, “Effect of curing condition on strength of geopolymer concrete”, Adv. Concr. Constr. 2 (1) (2014) 29–37.
  43. E.B. Gorur, O. Karahan, C. Bilim, S. Ilkentapar, E. Luga, “Very high strength (120 MPa) class F fly ash geopolymer mortar activated at different NaOH amount, heat curing temperature and heat curing duration”, Constr. Build. Mater. 96 (2015) 673–678.
  44. G. Gorhan, G. Kurklu, Composites: “Part B The influence of the NaOH solution on the properties of the fly ash-based geopolymer mortar cured at different temperatures”, Compos. Part-B 58 (2014) 371–377.
  45. P. Duxson, A. Fernández-Jiménez, J.L. Provis, G.C. Lukey, A. Palomo, J.S.J. Van Deventer, “Geopolymer technology: the current state of the art”, J. Mater. Sci. 42 (9) (2007) 2917–2933.
  46. D. Khale, R. Chaudhary, “Mechanism of geopolymerization and factors influencing its development: a review”, J. Mater. Sci. 42 (3) (2007) 729–746.
  47. J. Xie, O. Kayali, “Effect of initial water content and curing moisture conditions on the development of fly ash-based geopolymers in heat and ambient temperature”, Constr. Build. Mater. 67 (2014) 20–28.
  48. P. Nath, P.K. Sarker, “Effect of GGBFS on setting, workability and early strength properties of fly ash geopolymer concrete cured in ambient condition”, Constr. Build. Mater. 66 (2014) 163–171.
  49. M. Babaee, A. Castel, “Chloride-induced corrosion of reinforcement in lowcalcium fly ash-based geopolymer concrete”, Cem. Concr. Res. 88 (2016) 96– 107.
  50. D. Hardjito, S.E. Wallah, D.M.J. Sumajouw, B.V. Rangan, “Brief Review of Development of Geopolymer Concrete”, Invit. Pap. Georg. Hoff Symp. Am. Concr. Institute, no. May, pp. 1–10, 2004.
  51. E.J. Guades, “Experimental investigation of the compressive and tensile strengths of geopolymer mortar: the effect of sand/fly ash (S/FA) ratio”, Constr. Build. Mater. 127 (2016) 484–493.
  52. S.M. Rao, I.P. Acharya, “Synthesis and characterization of fly ash Geopolymer sand”, J. Mater. Civ. Eng. 26 (2) (2014) 186–190.
  53. Bereau of Indian Standards. (BIS). “Method of test for pozzolanic materials”, IS- 1727, New Delhi, India 1967.
  54. Bureau of Indian Standards. (BIS), “Oridary Portland Cement, 43 Grade- Specification”, IS-8112, New Delhi, India, 2013.
  55. Bereau of Indian Standards. (BIS), “Method of Test for aggregate for concrete – Specefic Gravity, Density, Voids Absorption and Bulking”, IS 2386 (Part-III), New Delhi, India, 1963
  56. Bereau of Indian Standards. (BIS), “Method of Test for aggregate for concrete- Particle Size and Shape”, IS 2386 (Part-I), New Delhi, India, 1963.
  57. Bureau of Indian Standards. (BIS), “Specification for Coarse and Fine Aggregate From Natural Sources for Concrete”, IS 383 New Delhi,India, 2016.
  58. Bureau of Indian Standards. (BIS), “Classification and Identification of Soils for General Engineering Purposes”, IS 1498, New Delhi, India, 1970.
  59. Bureau of Indian Standards. (BIS), “Methods of test for soils- Direct Shear Test”, IS 2720 (Part 13), New Delhi, India, 1986.
  60. Bureau of Indian Standards. (BIS), “Methods of test for soils- Determination of pH Value”, IS 2720 (Part 26), New Delhi, India, 1987.
  61. S. Asavapisit, G. Fowler, C.R. Cheeseman, “Solution chemistry during cement hydration in the presence of metal hydroxide wastes”, Cem. Concr. Res. 27 (8) (1997) 1249–1260.
  62. Bereau of Indian Standards, “Method of Test for aggregate for concrete – Soundness”, IS 2386 (Part-V), New Delhi, India, 1963.
  63. Bereau of Indian Standards, “Method of Test for aggregate for concrete – Alkali Aggregate Reactivity”, IS 2386 (Part-VII), New Delhi, India, 1963.
  64. K. Kupwade-patil, E.N. Allouche, “Impact of alkali silica reaction on fly ashbased geopolymer concrete”, J. Mater. Civ. Eng. 25 (2016) 131–139.
  65. A. Palomo, A.F. Jiménez, “Alkaline Activation, Procedure for Transforming Fly Ash into New Materials”, Part 1: Applications, Proc. World Coal Ash, pp. 1–14, 2011.
  66. G.S. Ryu, Y.B. Lee, K.T. Koh, Y.S. Chung, “The mechanical properties of fly ashbased geopolymer concrete with alkaline activators”, Constr. Build. Mater. 47 (2013) (2015) 409–418.
  67. Bereau of Indian Standards, “Method of Test for aggregate for concrete – Measuring Mortar Making Properties of Fine aggregate”, IS 2386 (Part-VI), New Delhi, India, 1963.
  68. ASTM (2001b), “Standard Test method for potential reactivity of aggregate (mortar-bar-method)”, C1260, West Conshohocken, PA, 2001.
  69. ASTM (2008), “Standard specification for coal fly ash and raw or calcined natural pozzolan for use 310 in concrete:. C618, West Conshohocken, PA, 2008.
  70. Bereau of Indian Standards, “Methods of Sampling and Analysis of Concrete”, IS 1199, New Delhi, India, 1959.
  71. ASTM C 1072-11 “Standard Test for Measurement of Masonry Flexural Bond Strength”, American Society for Testing and Materials.
  72. BS: 4551-1980 “British standard methods of testing mortar, screeds and plasters”, British Standard Institution, U.K.
  73. IS: 456-2000 “Plain and Reinforced Concrete – Code for Practice”, Bureau of Indian Standards, New Delhi, India.
  74. IS: 383-1970 (2002) “Specification for coarse and fine aggregates from natural sources for concrete”, Bureau of Indian Standards, New Delhi, India.
  75. IS: 2116-1980 (1998) “Specification for Sand and Masonry Mortars”, Bureau of Indian Standards, New Delhi, India.
  76. IS: 2250 – 1981 (2000) “Indian Standard Code of practice for preparation and use of Masonry Mortars”, Bureau of Indian Standards, New Delhi, India.
  77. IS: 1199 – 1959 (2004) “Methods of sampling and analysis of concrete”, Bureau of Indian Standards, New Delhi, India.
  78. IS: 516 - 1959 (2004) “Methods of tests for strength of concrete”, Bureau of Indian Standards, New Delhi, India.
  79. IS: 2770 (Part I) – 1967 (2002) “Methods of testing bond in reinforced concrete”, Bureau of Indian Standards, New Delhi, India.
  80. Venkatarama Reddy, B.V. and Ajay Gupta, “Characteristics of cement – Soil mortars, Materials and Structures (RILEM)”, Vol. 38 (July 2005), No. 280, 639-650.
  81. Report on flyash generation at coal/lignite based thermal power stations and its utilization in the country for the year 2014-15, Central electricity authority New Delhi October 2015.
  82. Ahmad Md Aquil, Shahnawaz Mohammad, Faiz Siddiqui Mohd. and Khan Zainul Hasan, “A Statistical Review on the Current Scenario of Generation and Utilization of Fly-Ash in India”, International Journal of Current Engineering and Technology, pg 2434-2438.
  83. Ahmed Farhan, Khan Abdul Ahed, “Forecasting the Usage of Flyash in Indian Thermal Power Plants”, International Journal of Innovative Research & Development, pg 329-332.
  84. Ahmed Sirajuddin, Saurikhia Ambrish, Haleem Abid and Gangopadhyay Subhmay, “Geographical Spread of Fly Ash Generation and Residual Potential for its Utilization in India”, International Journal of Innovative Research and Review ISSN: 2347 – 4424, pg 8-18.
  85. Ashoka D., Saxena M. and Asholekar, S.R., “Coal Combustion Residue-Environmental Implication and Recycling Potential, Resource Conservation and Recycling”, 3, 1342-1355. (2005)
  86. B. V. Venkatrama Reddy, Suitability of manufactured sand (M-Sand) as fine aggregate in mortars and concrete, CSIC project: CP 6597/0505/11-330 dated 5th July 2011, January 2012, pp. 1-16.
  87. Bhattacharjee Ujjwal, Kandpal Tara Chandra,”Potential of fly ash utilisation in India”, Centre for Energy Studies, Indian Institute of Technology Delhi, Hauz Khas, New Delhi 110 016, India Received 12 June 2000, pg 151-165.
  88. S EN 1097-3, Test for mechanical and physical properties of aggregates. Determination of the bulk density, BSI, London, UK, 2008.
  89. BS EN 1097-6, Test for mechanical and physical properties of aggregates. Determination of particle density and water absorption, BSI, London, UK, 2008.
  90. BS EN 12390-7, Hardened density of test specimens, BSI, London, UK, 2009.
  91. Chattopadhyay G. C., “Issues in utilization of ash by Thermal Power Plants in the country”, Journal of Government Audit and Accounts, pg 1-7.
  92. Dhir, R K, McCarthy, M J and Tittle, P A J, “Use of conditioned PFA as a sand component in concrete, Materials and Structures”, Vol. 33, Issue 1, pp. 38-42, 2000.
  93. Dr. P.B.Sakthivel, C.Ramya, M.Raja, “An Innovative Method of Replacing River Sand by Quarry Dust Waste in Concrete for Sustainability”, International Jounal of Scientific & Engineering Research, Volume 4, Issue 5, ISSN 2229-558, May 2016, pp. 246-249.
  94. Duxson P, Lukey GC, van Deventer JSJ (2006) J Non-Cryst Solids 352:5541
  95. Duxson P, Provis JL, Lukey GC, Mallicoat SW, Kriven WM, van Deventer JSJ (2005) Colloid Surf A 269:7.
  96. ENVIS Centre on Flyash, Flyash scenario in India.
  97. Fernandez-Jimenez A, Palomo A, Sobrados I, Sanz J (2006) Microporous Mesoporous Mater 91:111.
  98. Flower DJM, Sanjayan JG (2007) Int J Life Cycle Assess 12(5):282.
  99. Flyash Wikipedia.
  100. Haque Md Emamul, “Indian fly-ash: production and consumption scenario”, Internat. J. Waste Resources, Vol. 3(1)2013:22-25.
  101. Hardjito D, Wallah SE, Sumajouw DMJ, Rangan BV (2002) J Aust Ceram Soc 38:44.
  102. Hardjito D, Wallah SE, Sumajouw DMJ, Rangan BV (2004) ACI Mater J 101(6):467.
  103. Hardjito D, Wallah SE, Sumajouw DMJ, Rangan BV (2004) In: Proceedings of 18th Australasian conference on the mechanics of structure & materials, Perth.
  104. Jain A.K.,” Status of Availability, Utilization and Potential of Fly ash use in Construction”
  105. Jones M. Rod, Halliday Judith E, Csetenyi Laszlo J, Zheng and Strompinis, “Utilizing Stock Piled Flyash to Manufacture Sand For Mortar”, 2015 World of Coal Ash (WOCA) Conference in Nasvhille, TN-May 5-7, 2015.
  106. K. Arul Priya, Strenght and Durability Studies of M-Sand and Fly Ash Based Geopolymer Concrete, International Journal of Trend in Research and Development, Volume3(3), ISSN 2394-9333, May-June2016, pp. 90-97.
  107. Kashi Mohsen G, swan W. Christopher, Holmstrom Ola C, “Innovative, Light weight Synthetic Aggrgates Developed from Coal Fly Ash”
  108. Komnitsas K., Zaharaki Dimitra, “Geopolymerisation: A review and prospect for the minerals industry”, Minerals Engineering 20 (2007) 1261-1277.
  109. Krausova K., Cheng T. W., Gautron L, Dai Y. S, and Borenstajn S., “Heat Treatment on Fly and Bottom Ash Based Geopolymers: Effect on the Immobilization of Lead and Cadmium” International Journal of Environmental Science and Development, Vol. 3, No. 4, August 2012.
  110. Kumar Vimal, Mathur Mukesh, Sinha Shashank Shekhar, “A Case Study: Manifold Increase in Flyash Utilisation in India”, Fly Ash Utilization Programme (FAUP), TIFAC, DST, New Delhi – 110016, pg I 1.1-I 1.8.
  111. Mohd Mustafa Al. BAkri etal, “Mechanism and Chemical Reaction of Fly Ash Geopolymer Cement-A Review”, Asian Journal of Scientific Research 1(5):247-253, January 2011.
  112. Nawaz. I., “Disposal and Utilization of Fly Ash to Protect the Environment”, International Journal of Innovative Research in Science,Engineering and Technology, pg 5259-5266.
  113. Tiwari Manoj Kumar, Bajpai2 Dr. Samir, Dewangan Dr Umesh. Kumar, “Fly Ash Utilization: A Brief Review in Indian Context”, International Research Journal of Engineering and Technology (IRJET), pg 949-955.
  114. Nithyambigai. G, Partial Replacement of Manufactured Sand and Fly Ash in Concrete, International Journal of Emerging Technology and Advanced Engineering, Volume 5, Issue 6, ISSN 2250-2459, June 2015, pp. 166-170.
  115. Palomo A, Grutzeck MW, Blanco MT (1999) Cem Conrc Res 29:1323.
  116. Pan Zhu, Sanjayan Jay G, Rangan B. V., “An investigatipn of the mechanisms for strength gain or loss of geopolymer mortar after exposer to elevated temperature”, Journal of Materials Science April 2009, Volume 44, Issue 7, pp 1873–1880
  117. Pasla Dinafar. Properties of fly-ash lightweight aggregate concrete. Proceedings of the ICE-Construction Materials, Vol. 166, Issue3, June 2012.
  118. Provis JL, Duxson P, van Deventer JSJ, Lukey GC (2005) Chem Eng Res Des 83(A7):853.
  119. Ramamurthy K, Harikrishnan, “ Influence of binders on properties of sintered fly ash aggregate”, Cement and Concrete Composites 28(1): 33-38, January 2006.
  120. Rangan BV (2003) Eng Aust 75(1):7.
  121. Rangan BV, Wallah SE, Sumajouw DMJ, Hardjito D (2006) Indian Concr J 80(6):47.
  122. Rao, S. and Acharya, “Synthesis and Characterization of Fly Ash Geopolymer Sand”, Journal of Materials in Civil Engineering, pg 912-917.
  123. Reddy,B.V.V (2012). “Suitability of manufactured sand (M sand) as fine aggregates in mortars and concrete”, Department of Mines and Geology Government of Karnataka, CSIC Project Rep. CP 6597/0505/11-30, Banglore, Karnataka.
  124. Senapati Manas Ranjan, “Fly ash from thermal power plants – waste management and overview”, CURRENT SCIENCE, VOL. 100, NO. 12, 25 JUNE 2011, pg 1791-1794.
  125. Sivakumar A. And Gomathi, “ Pelletized fly ash lightweight aggregate concrete: A promising material”, Journal of civil Engineering and Construction Technology Vol. 3(2), pp. 42-48, February 2012.
  126. Sujeong Lee, Myeong-Deok Seo, Yun-Jong Kim, Hyun-Hye Park, Taik-Nam Kim, Yeon Hwang, Sung-Baek Cho, “Unburned carbon removal effect on compressive strength development in a honeycomb briquette ash-based geopolymer”, International Journal of Mineral Processing 97 (2010) 20–25
  127. Sumajouw DMJ, Hardjito D, Wallah SE, Rangan BV (2007) J Mater Sci 42(9):3124.

Publication Details

Published in : Volume 6 | Issue 4 | July-August 2019
Date of Publication : 2019-07-30
License:  This work is licensed under a Creative Commons Attribution 4.0 International License.
Page(s) : 99-111
Manuscript Number : IJSRSET19647
Publisher : Technoscience Academy

Print ISSN : 2395-1990, Online ISSN : 2394-4099

Cite This Article :

Zohaib Uddin, Dr. Prabha Padmakaraan, Dr Ak Saxena, " Development and Study for the Conversion of Silo Ash into Aggregate of Different Fraction, International Journal of Scientific Research in Science, Engineering and Technology(IJSRSET), Print ISSN : 2395-1990, Online ISSN : 2394-4099, Volume 6, Issue 4, pp.99-111, July-August-2019. Available at doi : https://doi.org/10.32628/IJSRSET19647      Journal URL : https://res.ijsrset.com/IJSRSET19647

Article Preview